Tyler's CSCI Page

Category: All Products

3C collet closer for 3MT spindle lathes. Includes a 3MT to 3C collet adapter and a drawtube assembly. Adapter is precision ground to minimize runout. Drawtube is 18" long, and can be cut to fit most lathes with a 3MT spindle.

Collet Closer, Universal

3C collet closer for 3MT spindle lathes. Includes a 3MT to 3C collet adapter and a drawtube assembly. Adapter is precision ground to minimize runout. Drawtube is 18" long, and can be cut to fit most lathes with a 3MT spindle.		Price:
$99.95
This boring head shank has a 2 Morse taper on one end and a 7/8 - 20 thread on the other. It is tapped for a 3/8"-16 drawbar. The boring head shank adapts our boring head to the mills with a 2 Morse taper spindle, and to the tailstock of the mini lathe.

Boring Head Shank 2MT

This boring head shank has a 2 Morse taper on one end and a 7/8 - 20 thread on the other. It is tapped for a 3/8"-16 drawbar. The boring head shank adapts our boring head to the mills with a 2 Morse taper spindle, and to the tailstock of the mini lathe.		Price:
$19.95
2" Diameter boring head holds 1/2" shank boring bars. The boring head offsets up to 5/8". This boring head mounts on a shank with a 7/8" - 20 thread. Dial is graduated in 0.001" increments.

Boring Head - 2"

2" Diameter boring head holds 1/2" shank boring bars. The boring head offsets up to 5/8". This boring head mounts on a shank with a 7/8" - 20 thread. Dial is graduated in 0.001" increments.		Price:
$49.95
The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 7/16", and 9/16". The bore depth ranges from 3/4" to 3". The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter.

Boring Bar Set, 3MT Shank

The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 7/16", and 9/16". The bore depth ranges from 3/4" to 3". The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter.		Price:
$89.95
TestMe

testMe

TestMe		Price:
$500
This 5C collet chuck mounts with three holes for M8 cap screws. They are through drilled and counterbored for bolting on from the front. The registration inset is 92 mm in diameter.

Collet Chuck for 5C Collets

This 5C collet chuck mounts with three holes for M8 cap screws. They are through drilled and counterbored for bolting on from the front. The registration inset is 92 mm in diameter.		Price:
$199.95

Narrow Your Search Results: